Ok, a change from the dressmaking now to show you progress and final pics from a pendant commission I've been working on.
The brief? A 'simple' inverted triangle with a hanging loop at the top. Sounds easy, and in a way it is, but there are a lot of stages involved nonetheless.
I started with a flat strip of silver and filed a v-shape in the centre (unfortunately I forgot to take a picture of this so you'll have to use your imagination) then folded the resulting piece up to create the bottom half of the triangle:
Once this was soldered to secure it, I then filed the tops of the two prongs so that they lay flush with the piece going across the top and soldered the top bar in place:
The protuding ends were filed back flush to form a perfect triangle before all the faces were emeried smooth:
I then attached a small ring to the top of the triangle for the jump ring to go through, and polished the whole pendant up. The result is indeed a simple but beautiful pendant:
(although try as I might I couldn't get it to lie flat and not look wonky while photographing it in the box!)