What my customers get up to...

...or rather, one customer in particular. You see, I happen to have a customer who's a Shirley Bassey Tribute, and a rather good one at that. 

Anyone who's been on my Facebook page may have seen the photos of a stunning gold sequin dress and matching gold lame cape, which were commissioned by Jacqui to take with her on a trip to the states this Feb/March. I was quite pleased with the result, and the dress especially managed to look stunning both on the mannequin and on Jacqui during fittings.

By all accounts her trip seems to have gone really very well, she had a wonderful time and some of the comments on her Facebook page give testimony to how well her show was received everywhere she went. The gold dress seemed to make an appearance at most shows she did, and she said there were often little gasps of amazement when she walked out in it - based on this photo she gave me, I'm not surprised!

Sewing with tissue lame

After finishing a recent project which reminded me how daunting tissue lame can be if you haven't used it in a while I thought I would share some tips to take some of the mystery out of it. Please don't launch straight in to a precious piece of fabric with these though, test them on a scrap and play around with the settings on your machine as they all behave slightly differently!

Cutting the fabric

Don't use your best dressmaking shears to cut the lame. The metallic threads will blunt your shears in no time. If you can, buy a cheap pair especially, or clean-up and use a different pair of household scissors.

Needle  

If you don't use the right type of needle it will catch as it sews, resulting in 'ravels' and pulls all up your seam. Although it's not a jersey fabric at all, you will probably find that a jersey (aka ball-point) needle works best. Make sure your needle is new and change it more regularly than you usually would - as with scissors, the metallic threads wreak havoc on the needle. You'll be able to tell if it's too blunt as you'll start to get pulls in the fabric again.

Tension

You should find that normal sewing tension works fine, however if you get a rippled effect on your seam the best way to remove this is to use the same trick as with chiffon and other fine fabrics - while feeding your material through to sew, pull gently on the seam coming out from behind the presser foot (not enough to drag the fabric through faster than it otherwise would but enough to increase the tension in the fabric)

Enclose all your edges

You need to finish all your edges on tissue lame otherwise it will fray within minutes. Don't try to overlock them, however, as it looks messy on this fabric. The best way to finish them is some sort of enclosed seam - I would suggest either a french seam, or even better a 'run and fell' seam (both sides shown below):

The same goes for your hem: chose a rolled hem if at all possible. If you've got a rolled hem foot for your machine the fabric should go through fine, if not, leave an extra hem allowance and do a thicker hand-rolled hem.

If you do particularly want to leave a raw edge, run a narrow zig-zag stitch about 1/2cm from the edge to reduce the likelihood of fraying reducing your fabric to bare threads.

Oh, and take your time! Tissue lame is not a fabric you want to have to unpick a long seam from!!

Once you've done it though, you'll be able to stand back and feel proud of your work. It is a fabric that can create amazing garments!